Panasonic AG520E Operating Guide
18
1
ON-TIMER with Alarm
TV Timer Features
Ready Checklist
The clock is set to correct time.
This unit can be set to automatically power on in one of 2
modes (TV or Playback). Even if you set the On Timer, it
will not be performed during Play Lock mode. You can also
combine the On-Timer with a one minute alarm that
gradually increases in volume.
modes (TV or Playback). Even if you set the On Timer, it
will not be performed during Play Lock mode. You can also
combine the On-Timer with a one minute alarm that
gradually increases in volume.
• If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
Press PROG
to display SET PROGRAM screen.
to display SET PROGRAM screen.
Note
SET :
SELECT :
END : PROG
SET PROGRAM
T I MER PROGRAMMING
ON TIMER
2
3
ON T I MER
SELE CT HOUR
6:--AM CH --
SET :
SELECT :
END : PROG
ALARM : ON
1) Press
to select
desired settings.
2) Press to set the
ON-TIMER TIME or
ON-TIMER mode.
ON-TIMER mode.
4
ON T I MER
SELE CT ALARM
6:00AM CH08
SET :
SELECT :
END : PROG
ALARM : ON
CANCEL : ADD / DLT
ABC
Press
to select
ALARM “ON” or “OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use
and to move back and correct.
To Cancel ON-TIMER set,
repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
clear the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
ON TIMER
Indicator
Indicator
1)Press
to select
“ON TIMER.”
2)Press to display
ON TIMER screen.
<Model AG-520E unit shown>
• You can choose TV or PLAY for the On
Timer mode. (If TUNER:OFF, you can only
select PLAY.)
select PLAY.)
• Make sure a tape is inserted if Playback
mode is selected.
5
Press PROG
to set ON TIMER.
to set ON TIMER.
• “ON TIMER SET” is displayed.
• ON TIMER Indicator lights up on the unit.
• ON TIMER Indicator lights up on the unit.