Panasonic AG520E Operating Guide
27
Advanced Operation
Zero Search
To quickly return to a specific tape counter location.
1
2
Press STOP.
4
5
5
3
Continue playback, rewind, or
fast forward.
fast forward.
Press COUNTER
RESET at the
desired position to
reset to “0:00:00.”
RESET at the
desired position to
reset to “0:00:00.”
•
: Present position mark
: Zero position mark
: Zero position mark
• Unit goes into FF or REW mode and
stops at the last point the Counter was
set to 0:00:00.
set to 0:00:00.
Press DISPLAY during playback
to display the Counter.
to display the Counter.
Press CM/ZERO repeatedly to
select skip time in Playback mode.
select skip time in Playback mode.
Commercial Skip
By pressing the CM/ZERO button in Playback
mode you can skip over 1 to 3 minutes of recorded
tape in just a few seconds.
mode you can skip over 1 to 3 minutes of recorded
tape in just a few seconds.
1
Press CM/ZERO
in stop mode to
start ZERO
SEARCH.
in stop mode to
start ZERO
SEARCH.
BEG I N END
1 : 23 : 45
BEG I N END
0 : 00 : 00
• No indication appears.
• If a blank portion exists on the tape, and
depending on the position of the mark,
the mark display may be out of position.
the mark display may be out of position.
Note
PLAY/REPEAT
<Model AG-520E unit shown>