Panasonic RFU350 Operating Guide
RQT8946
5
5
Different ways to use the unit
Selecting the sound quality
that suits the broadcast
Each time this button is
pressed, the position of
“ ” changes.
NORMAL-
M U S I C -
N E W S -
H I G H -
This position is
recommended for
programs.
Set to this position to enjoy
Set to this position to enjoy
music.
Set to this position to listen
to news programs.
Set to this position when
high-pitched sound is hard
to hear.
Using the sleep timer
Press
.
The unit’s power is automatically turned off when the set time is
reached.
Each time the button is pressed, the setting changes in
the following sequence: 30 (minutes) 60 90 120
OFF (released)
To display how much time remains until the set time
Press
.
When the power is turned on again, the broadcast station that was last
tuned in when the power was turned off, will be tuned in.
Listening to sound via
earphone
(not included)
• Turn the volume down
before connecting the
earphone.
Plug type:
Ø 3.5 mm monaural mini plug
Avoid listening for prolonged periods of
time to prevent hearing damage.
Note
Remaining time
Note
Press
or
.
RF-U350
RF-U300
Preset tuning
A total of 10 FM stations can be preset.
Preset stations
While listening to the station you want to register, hold down one of
the number buttons [1] to [5] for at least 1 second. The number of
the button you pressed and “PROGRAM” now appear on the display
panel, and the station is registered in the button concerned.
Example: When you registered a
station in button [1]
87 . 60 M1
• To register a station greater than 5, first press [5+], then, e.g. to
register 7 (within 10 seconds) press and hold [2].
Listening to a station which you have registered
After the power has been turned on, press the number button in which
the desired station has been registered. (To listen to, e.g., station 7,
press [5+], then press [2].) The station will then be tuned in.
Changing a station which you have registered
With the new station you want to register already tuned in, press and hold
the button with the number whose registered station is to be changed so
that you will overwrite the existing station with the new one.
Setting the clock
The 24-hour system is used to display
the time on the clock.
CLOCK 0 : 00
1. Press and hold.
CLOCK 14 : 00
2. Select the time.
3. Press
.
• To display the clock
when the unit is on
Press
The time is always displayed while the
power is off.
The clock is accurate to within
± 60 seconds a month. Readjust if
necessary.
Note
RF-U350
RF-U300
The illustrations show
RF-U350.
RF_U350_8946_E.indb 5
2007/02/02 13:04:15