Panasonic ICX Manual
Section 700 - Operation
Chapter 5. Key Telephone Features
ICX-45-700
ICX (International) issued June 2000
151
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•
N/A
Considerations
•
You can transfer an outside call to a busy extension using Camp-on. See “To camp a call onto a
busy extension:” on page 143.
busy extension:” on page 143.
•
Manual camp-on to a busy extension will not Call Forward/No Answer.
•
Automatic camp-on to a busy extension will Call Forward/No Answer.
•
Calls transfered to a busy extension will Call Forward.
•
Text message send and text message reply requires display Key Telephones. Also, Text Message
Send and Text Message Reply keys must be programmed on the telephones.
Send and Text Message Reply keys must be programmed on the telephones.
Conference Calls
Description
Conference Calls allow you to add another party to an existing conversation. With the standard
system configuration, up to 3 parties can be included in a conference call at any one time. If the
optional Conference Card is installed, up to 8 parties can participate in a conference call.
system configuration, up to 3 parties can be included in a conference call at any one time. If the
optional Conference Card is installed, up to 8 parties can participate in a conference call.
The Version 3.0 software release allows any combination of extensions and trunk lines to be in the
conference as long as the original extension is in the conference and the total number of parties does
not exceed 8. With Version 3.0 software, only one operation is used to establish and add to a
conference. You simply have to place the current call on hold, dial the next party and press the CONF
key. No different operation or access code is required to add additional parties to the call.
conference as long as the original extension is in the conference and the total number of parties does
not exceed 8. With Version 3.0 software, only one operation is used to establish and add to a
conference. You simply have to place the current call on hold, dial the next party and press the CONF
key. No different operation or access code is required to add additional parties to the call.
When no optional conference card is installed, the system supports the following types of three-party
conference calls:
conference calls:
•
3 extensions
•
2 extensions and 1trunk line
•
1 extension and 2 trunk lines
When the optional 8-party conference card is installed, the system supports any combination of
conference calls, except all outside lines.
conference calls, except all outside lines.
Action
Result
1. Replace the handset or press the ON/OFF key.
2. Lift the handset or press the ON/OFF key again to be con-
nected to the waiting call.
OR....
Press the HOLD key.
• Current call placed on hold
• Connected to waiting call