Panasonic ICX Manual

Page of 333
Section 700 - Operation
Chapter 5. Key Telephone Features
ICX-45-700
ICX (International) issued June 2000
 171
Note:
If Headset mode is already on, the following procedure turns it off. If Headset mode is off, 
this procedure turns it on.
Hardware Requirements
A headset must be installed.
Considerations
Intercom Dial Tone is enabled/disabled regardless of Headset mode (per programming for the 
Extension Class of Service [COS])
Hot Dial Pad
Description
The dial pad on digital key phones can be designated as “hot” on an extension-by-extension basis.
The Hot Dial Pad allows the user to initiate a call without going offhook.  Extensions with the Hot 
Dial Pad enabled can initiate calls by pressing any of the numeric keys (0-9).  The “*” and “#” keys 
are not hot.
The Dial Pad can be hot under these conditions:
When the extension is idle
When the extension is holding a call
When the extension is receiving a page.
The Dial Pad cannot be hot under these conditions:
When a call is ringing at the extension (intercom or trunk)
When the extension is on a call.
Hardware Requirements
N/A
Considerations
Paging: The Hot Dial Pad cannot be used to initiate a page. 
Action
Result
1.   Pick up the handset or press the ON/OFF key.
Intercom dial tone
2.   Press the PROG key.
3.   Enter 90 for Headset mode.
4.   Replace the handset or press the ON/OFF key.