Panasonic ICX Manual
Section 700 - Operation
Chapter 5. Key Telephone Features
ICX-45-700
ICX (International) issued June 2000
197
To use a PSD Key that links multiple SSDs:
To manually link speed dial keys together:
Hardware Requirements
•
N/A
Considerations
•
N/A
Speed Dial Name Assignments
You can assign names to PSD numbers from a key telephone without entering the programming
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.)
characters.)
4. Enter the PSD bin number (80-90).
Enter Spd Dial displays
5. Press the MEMORY key.
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be dialled.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialled.
8. Press the HOLD key when finished.
Stored PSDXXX displays
Action
Result
1. If necessary, select the trunk group (9 [UK/HK], 0 [Taiwan,
Malaysia, Indonesia], or 81-84). (Normally the trunk is
selected by the speed dial numbers.)
selected by the speed dial numbers.)
2. Press the PSD key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the MEMORY key,
then enter the SSD bin number.
then enter the SSD bin number.
4. Use the one-touch keys or press the MEMORY key and
enter the SSD codes to dial the parts of the phone number
until it is completed.
until it is completed.
Action
Result