Panasonic ICX Manual
Section 700 - Operation
Chapter 3. System Features
ICX-45-700
ICX (International) issued June 2000
31
•
Caller ID circuit card (VB-44513 or VB-44515)
•
ISDN (PRI = VB-44540UK, BRI = VB-44530UK)
Considerations
•
The system may be set to display Caller ID in one of two priorities as follows:
Priority Choice 1
• CID name (future feature)
• Alpha tagging if matched
• DDI name
• Alpha tagging if matched
• DDI name
Priority Choice 2
• DDI name
• CID name (future feature)
• Alpha tagging if matched
• CID name (future feature)
• Alpha tagging if matched
•
Currently Caller ID only supports the single format (number only). Multiple format (number and
name) is not currently available but is planned as a future feature.
name) is not currently available but is planned as a future feature.
•
Caller ID Call Logging only shows the CID number.
Centrex/PBX Compatibility
Description
Centrex/PBX Compatibility allows the System to be connected behind centrex or PBX lines.
The System supports up to 6 access codes for dialling centrex or a PBX. These access codes allow the
System, System Message Detail Recording (SMDR) (Call Logging) output to exclude the number
dialled to reach a centrex or PBX line.
System, System Message Detail Recording (SMDR) (Call Logging) output to exclude the number
dialled to reach a centrex or PBX line.
When connected behind a PBX or Centrex, Toll Restriction Service (TRS) (Call Barring) can be used
to restrict calls.
to restrict calls.
The System also supports transmission of a flash signal over the centrex or PBX link.
Hardware Requirements
•
N/A
Considerations
•
N/A
Class of Service
Description
A Class of Service (COS) allows or restricts access to a group of features or functions. For instance,
an Extension COS may allow Call Forwarding features. In the System, both extensions and trunks use
classes of service.
an Extension COS may allow Call Forwarding features. In the System, both extensions and trunks use
classes of service.