Panasonic ICX Manual

Section 700 - Operation

Chapter 3. System Features

ICX-45-700

ICX (International) issued June 2000

 57

Version 3.5 and later

Network Centralized Voice Mail allows one primary attendant group in the network to handle network 
attendant calls.

•

FF6-2-04: Route Table: Digit Modify Pattern No.

•

FF6-2-05: Digit Modify Table - Add Ending Digits

•

FF6-2-05-0005: Numbering Plan

•

FF6-2-06: Authorization Code (UK Only)

•

FF6-2-09-0001: Dialing Access Voice Mail System

•

FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)

•

FF8-1-05: Call-Forward ID Codes for Voice Mail

•

FF8-1-06: MSG Key ID Codes (USA only)

Network Extension Calling allows you to reach an extension on another PBX. Based on the number 
you dial, the System network routes the call automatically.

Version 3.5 and later

When three or more systems are networked together with one ICX as the tandem, Network Flash 
Transfer determines where a call is held when Network Hold is pressed.

•

FF1-0-04: Trunk COS (Network Flash Forwarding)

Version 3.5 and later

Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key. 
When using Network Hold, you cannot establish a conference call between nodes, and only one party 
can place the call on hold.

•

FF1-0-04: Trunk COS (Broker’s Hold for Network Calls)

•

FF1-1-01-0020: Network Flash Signal Timer

•

FF1-2-02: FF Dial Codes: Plan A (Network Flash Send During Intercom Dial Tone)

•

FF1-2-03: FF Dial Codes: Plan B (Network Flash Send During Intercom Dial Tone)

•

FF4-0-BSSC-0: FF-Key Assignment (Network Flash During Talk on FF-key)

Network Paging allows users on one System to page on another System when the appropriate Class of 
Service (COS) allows.