Panasonic ICX Manual
82
ICX (International) issued June 2000
ICX-45-700
Chapter 4. User Maintenance
Section 700 - Operation
Hardware Requirements
•
N/A
Considerations
•
N/A
Set Call Forward ID Codes for Voice Mail
Description
(For a description of Call Forward ID codes for Voice Mail, see “Call Forward ID Code for Voice
Mail” on page 72.)
Mail” on page 72.)
Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box for
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
Operation
To set the Call Forward ID code:
10. To set Call Forward Busy destinations for additional
extensions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
12. Press the
MEMORY
key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action
Result
1. If not already in User Maintenance mode, enter User Main-
81-
User MAINT displays
2. At the 81 level, enter 05.
3. Press the HOLD key.
8105-
C.FWD ID Code displays
4. Press the HOLD key.
CF ID-EXT Number displays
5. Dial the extension number.
6. Press the HOLD key.
CF-ID EXT
XXX displays (where
XXX = extension number)
Action
Result