Panasonic PV C923 Operating Guide
15
Press the DISPLAY button. The clock, date, channel
number, real time tape counter, tape speed and VCR
operation will be indicated.
Press the DISPLAY button again to disappear the call display.
number, real time tape counter, tape speed and VCR
operation will be indicated.
Press the DISPLAY button again to disappear the call display.
Press the MUTE button to switch
off the sound. The TV/VCR’s sound
will be silenced and “MUTE” will
briefly appear on the screen. The
sound can be switched back on by
pressing this button again or one
of the VOL + or – button.
off the sound. The TV/VCR’s sound
will be silenced and “MUTE” will
briefly appear on the screen. The
sound can be switched back on by
pressing this button again or one
of the VOL + or – button.
MUTE
Press and release the CH
C
or
D
button. The channel automatically
stops at the next channel set
into memory. For proper operation,
before selecting channels, they
should be set into the memory.
See pages 16 and 17 “To memorize
channels”.
stops at the next channel set
into memory. For proper operation,
before selecting channels, they
should be set into the memory.
See pages 16 and 17 “To memorize
channels”.
CH 012
NOTE: To listen through the headphones, insert a
headphones (not supplied) with a 1/8" mini plug
into PHONES jack on the front. The sound from
the TV speaker is muted.
into PHONES jack on the front. The sound from
the TV speaker is muted.
Press the CC button to switch
between normal TV and the two
closed caption modes (captions and
full screen text). Closed captioning
will display text on the screen for
hearing impaired viewers.
between normal TV and the two
closed caption modes (captions and
full screen text). Closed captioning
will display text on the screen for
hearing impaired viewers.
NOTES:
•
If using an indoor antenna or if TV reception
is very poor, the Closed Caption Decoder text
may not appear. In this case, adjust the
antenna for better reception or use an outdoor
antenna.
may not appear. In this case, adjust the
antenna for better reception or use an outdoor
antenna.
•
When activating the Closed Captioned
Decoder, there will be a short delay before
the Closed Captioned text appears on the
screen.
Decoder, there will be a short delay before
the Closed Captioned text appears on the
screen.
•
Closed Captioned TV programs can be
recorded and played back on a VCR with the
Closed Captioned text intact. The Closed
Captioning text will disappear during Cue,
Rewind and Pause modes or if the VCR
tracking is not adjusted properly.
recorded and played back on a VCR with the
Closed Captioned text intact. The Closed
Captioning text will disappear during Cue,
Rewind and Pause modes or if the VCR
tracking is not adjusted properly.
•
Closed Captioned text is only displayed in
locations where it is available.
locations where it is available.
•
If the Display is on, the Closed Captioning text
will not appear.
will not appear.
CAPTION CH 1
CH 012
This button allows you to go back
to the last channel selected by
pressing the R-TUNE button. Press
this button again to return to the
last channel you were watching.
to the last channel selected by
pressing the R-TUNE button. Press
this button again to return to the
last channel you were watching.
SLEEP
120
To set the TV/VCR to turn off after a preset amount of
time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of
the SLEEP button (120, 110, ...10, 0). After the sleep time
is programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting,
press the SLEEP button and the
remaining time will be momentarily
displayed. To cancel the sleep timer,
press the SLEEP button repeatedly
until the display turns to 0.
time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of
the SLEEP button (120, 110, ...10, 0). After the sleep time
is programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting,
press the SLEEP button and the
remaining time will be momentarily
displayed. To cancel the sleep timer,
press the SLEEP button repeatedly
until the display turns to 0.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired
viewers or it will translate and display text in another
language.
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired
viewers or it will translate and display text in another
language.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact.
The Closed Captioned text will disappear during Cue
(Fast Forward Search), Review (Rewind Search) and
Pause Modes or if the VCR tracking is not adjusted
properly.
back on a VCR with the Closed Captioned text intact.
The Closed Captioned text will disappear during Cue
(Fast Forward Search), Review (Rewind Search) and
Pause Modes or if the VCR tracking is not adjusted
properly.
TO VIEW CLOSED CAPTIONS
Press the CC button on the remote control to switch
between normal TV and the two Closed Caption Modes
(Captions and Full Screen Text).
between normal TV and the two Closed Caption Modes
(Captions and Full Screen Text).
MUTE
DISPLAY
8:47AM THU
CH 012
00:04:38 SP
Current time
Channel No.
VCR operation
: Play
: Rewind
: Fast-forward
: Eject
: Recording
: Pause
: Stop
Tape In
Auto Repeat
Tape Speed
Real Time Counter
SLEEP
R-TUNE
CLOSED CAPTION
CHANNEL
5B02301A E P12-19
9/4/03, 12:24 PM
15