Panasonic TH-50PH30E Operating Guide
44
When Image input and Audio input
differ from each other, the Audio input
is displayed as below.
differ from each other, the Audio input
is displayed as below.
Options Adjustments
Set up the sound when an image input is selected.
Image input
Audio input
[VIDEO]
VIDEO / COMPONENT / DVI / PC / NO AUDIO
[COMPONENT]*
VIDEO / COMPONENT / DVI / PC / NO AUDIO
[HDMI]
VIDEO / COMPONENT / HDMI / DVI / PC / NO AUDIO
[DVI]
VIDEO / COMPONENT / DVI / PC / NO AUDIO
[PC]
VIDEO / COMPONENT / DVI / PC / NO AUDIO
NO AUDIO: No audio input (Mute)
* “COMPONENT”may be displayed as “RGB” depending on the setting of
“Component/RGB-in select”. (see page 36)
Note:
HDMI Audio is selectable only for HDMI Input.
HDMI Audio is selectable only for HDMI Input.
Audio input select
Press to select image input.
Press to select audio input.
Press ACTION ( ) button
VIDEO
Audio input select
COMPONENT
HDMI
DVI
PC
HDMI
DVI
PC
♪ VIDEO
♪ COMPONENT
♪ HDMI
♪ DVI
♪ PC
PC
COMPONENT
16:9
Options
Audio input select
Touch Panel settings
1/3
Press ACTION ( ) button
Options
Audio input select
Touch Panel settings
1/3
Touch Panel mode
Calibration mode
Calibration mode
Touch Panel settings
On
Touch Panel mode
Calibration mode
Calibration mode
Touch Panel settings
On
The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds.
After 180 seconds or when you have the menu displayed with a remote control, Calibration
mode is cancelled.
After 180 seconds or when you have the menu displayed with a remote control, Calibration
mode is cancelled.
Note:
For information on how to set up Calibration, please see Touch Panel instruction
manual.
For information on how to set up Calibration, please see Touch Panel instruction
manual.
The mode to restrict NANODRIFT Saver (see page 29) operation when using Touch Panel (available as an option) is set up.
Set “Touch Panel mode” to “On”.
Select “Calibration mode” and then press
.
This setting is used in calibrating a touch panel.
You can confi gure the setting if “Touch Panel mode” is “On”.
You can confi gure the setting if “Touch Panel mode” is “On”.
Calibration mode
Touch Panel settings (Settings when using Touch Panel)
ª
Calibration mode
1
select
2
adjust
1
select
2
set
NANODRIFT Saver in Touch Panel mode: On
The value set for NANODRIFT turns into “On” and
displayed in gray.
The moving distance of NANODRIFT is limited to 3 × 3 dots
to prevent pointer drift on a touch panel.
The value set for NANODRIFT turns into “On” and
displayed in gray.
The moving distance of NANODRIFT is limited to 3 × 3 dots
to prevent pointer drift on a touch panel.
When the menu is not displayed (normal screen)
Hold down
Hold down
for over 3 seconds.