Panasonic RRXS350E Operating Guide

19

•  When the unit is not in the stop state, press 

[STOP g/RETURN].

•  If an SD card is selected as the recording destination, 

insert the SD card beforehand. (

➜ page 24)

Press u, i to select “ ” and 
press [q OK] to enter.

Press +, – to select the recording 
time and press i.

: 30 minutes

:   1 hour

:  2 hours

: Until there is no empty space
: Disable the timer setting

Press +, – to select the hour for the 
time to start recording and press i.

Press +, – to select the minute for 
the time to start recording and 
press i.

Press +, – to select the recording 
destination and press [q OK] to enter.

:  SD card

: Internal memory

To exit the setting screen, press 
[STOP g/RETURN].

After you set a timer recording, “ ” is displayed.

At 1 minute before the specified time, the “ ”, 

recording indicator, and “ ” blink and the unit 

enters the standby state.

“ ” blinks during timer recording.

If you press [STOP g/RETURN] during a timer 

recording or standby, you can cancel the timer 

recording.

● 

If the power is off at the specified time, the power turns on and the timer recording starts, and then 

the power turns off at the end time. 

If the unit is in a playback state, playback stops and the timer recording starts.

● 

During timer recording, only stop operation and volume adjustment can be performed. Switch the 

Hold function to off before operation if it is on.

● 

Timer setting is disabled when the battery is replaced. Therefore, readjust the setting after replacing battery.

VQT4J69

VQT4J69_RR-XS350_E_En.indd   19

VQT4J69_RR-XS350_E_En.indd   19

2012/05/25   11:48:00

2012/05/25   11:48:00