Panasonic TH-65VX300ER Operating Guide

Cannot see 3D images

•  Has the 3D Eyewear been switched On?
•  Ensure that “3D Function” in “3D Settings” is set to “On”. (see page 45)
•  Some 3D image signals may not be automatically recognized as 3D 

images. Set “3D Picture Format” in “3D Settings” to match the picture 
format. (see page 45)

•  Check that there are no obstacles between the display (or 3D IR 

TRANSMITTER) and the 3D Eyewear. If the 3D Eyewear stops 
receiving the infrared signal for about 5 minutes, the 3D Eyewear will 
be turned off automatically.

•  Check the available area to use the 3D Eyewear.
•  Depending on the person, the 3D images may be diffi cult to see, 

or cannot be seen, especially in users that have a different level of 
eyesight between the left and right eyes. 
Take the necessary steps (wearing glasses etc.) to correct your 
eyesight before use.

3D Eyewear is turned off automatically

•  Check that there are no obstacles between the Display (or 3D IR 

TRANSMITTER) and the 3D Eyewear or that the 3D Eyewear is 
placed inside the coverage area. If the 3D Eyewear stops receiving 
the infrared signal for about 5 minutes, the 3D Eyewear will be turned 
off automatically.

There is something wrong with the 3D 
images

•  Switch “Reverse” and “Normal” under “3D Picture Sequence” in “3D 

Settings” (see page 45).

Indicator lamp will not light when the 3D 
glasses are turned ON.

•  The battery may be running low or fl at. Change the battery or charge 

the 3D glasses. 

If the picture appears to be abnormal, refer to the table below to choose the correct 3D picture format setting.

*

1

Normal*

2

*

1

Normal*

2

Normal

Normal

*1

 When the source image is not recognized correctly

*2

  When “3D Function” is set to “On”, the images will be displayed with 3D effect. When set to “Off”, displayed 

without 3D effect.

•  Depending on the player or contents, the image may be different from the above illustrations.