Panasonic TH-65VX300ER Operating Guide

Setup
Pos. /Size

Sound

Picture

2 

 access

1 

 select

2 

  adjust

1 

  select

Normalise

1

Volume

Sound Mode

Normal

Bass

0

Mid

0

Treble

0

Balance

0

Surround

Off

    
     

Normal:  Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear: 

Attenuates human voice.

Adjusts low pitch sounds.

Adjusts normal sounds.

Adjusts high pitch sounds.

Adjusts left and right volumes.

Select On or Off.

Adjusts the sound volume level.

Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.

Selects left audio channel.

Selects right audio channel.

On: 

Enables audio output.

Off:  Disables audio output.

Sets audio channels to show in the audio level meter.

8 channels are displayed in the audio level meter; 

4 channels each on both right and left sides of the 

display.

Off:  Hides the audio level meter.

1-8ch: Displays the audio level meter (1-8ch)

9-16ch: Displays the audio level meter (9-16ch)

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDI 
Terminal Board for 3D (TY-FB30DHD3D)

Normalise

While the “Sound” menu is displayed, if the OK button is pressed during “Normalise”, then all adjustment values 
are returned to the factory settings.

Left Channel

SDI Sound Output

Right Channel
Sound Out
Level Meter

Channel 1

Channel 2

On
Off