Panasonic TH-65VX300ER Operating Guide

Assigning functions to the FUNCTION button on the remote control enables a user to switch 
between show/hide and modes with just a single touch of a button. The function settings are 
confi gured by using “Function Button Settings” in the Setup menu (see page 57). The button 
functions are confi gured in two ways depending on the setting (On/Off) of “Studio mode” in the 
Options menu.

The factory preset functions are as described below.
Function Button 1: 3D Settings
Function Button 2: Signal
Function Button 3: Colour gamut
Function Button 4: Scrolling bar

Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function 
of each button.

If the guide display is not needed, set “Function Button Guide” in “Function Button Settings” to “Off” (see page 57).

The operation starts.

Function
1: 3D Settings

2: Signal

3: Colour gamut

4: Scrolling bar

The menu screen is displayed.
(Example: 3D Settings)

On

3D Function

On

Auto

3D Picture Format

3D Settings

3D Colour Compensation

Normal

3D Picture Sequence

3D

3D Viewing Mode

Safety Precautions

Pressing the FUNCTION button clears the menu.

Confi rmation screen (Example: Scrolling bar)

Yes

No

Function

Scrolling bar

Activates the “Scrolling bar only” screensaver. After 
15 minutes, the display enters standby mode.

To exit this mode, press any button.

Note:
“PC Power management” and “No signal power off” are deactivated during “Scrolling bar” or “Test Patterns” 
operation. (see page 43)

Press to select 

“Yes”.

Press.

Each time you press  , a different test pattern is displayed 
(seven in all).

Colour Bars

Red

Green

Blue

Frame

(2 lines × 2 dots)

Black

1% window

To exit this mode, press any button other than  .

The operation starts.