Panasonic TX-L65WT600B Operating Guide

- 73 -

Signal Condition

Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for freesat / DVB 

reception.

 

●

Use the Signal Quality indicator as follows.
–  Green bar: Good
–  Yellow bar: Poor
–  Red bar: Bad (Check the terrestrial aerial or satellite dish)

 

●

Vertical lines show the maximum signal value of the selected channel.

 

●

To change the channel

 

●

For freesat and DVB mode

Add New Channels

You can add any new channels found automatically to Channel List.
1.  The signal condition is displayed and press 

OK

 to access

 

●

If you select 

Any Satellite

 in 

Auto Setup

, this step is skipped.

 

●

It takes a while to check the connection for your selected satellite.

 

●

Ensure that the 

Signal Lock

 status is shown as 

Locked

. If it is not 

locked, the search cannot be executed.

 

●

If the status is shown as 

Not locked

 and 

Signal Quality

 / 

Signal 

Strength

 have no indications, please check the dish alignment.

2.  Select the search mode with   /   and press 

OK

 to start 

Add New 

Channels

 

●

New channels can only be added to the existing Channel List from the 

same satellite.