Panasonic th-103pf9ek Operating Guide
40
Options Adjustments
Item
Effect Adjustments
Initial VOL
level
Off
On
Press
button to adjust the volume when TV is turned on.
Off
On
Off: Sets normal volume.
On:
Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL
level
Off
On
Press
button to adjust the maximum volume.
Off
On
Off: Sets auto maximum volume.
On:
Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level”
automatically becomes the same as the “Maximum VOL level”.
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
INPUT lock
Off
PC
INPUT1
INPUT2
INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 13).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be fi xed as the value
input in the single screen display mode.
Studio W/B
Off
On
Off: Nullify all the settings adjusted.
On:
Sets the colour temperature for TV studio.
Note: Valid only when the low is set as colour temperature on screen adjustment.
Advanced PIP
Off
On
Off: Sets normal two screen display mode (see page 21).
On:
Sets Advanced PIP mode (see page 22).
Notes:
• When “INPUT lock” is “On”, you cannot use all the two screen display functions.
•
,
buttons are unavailable during Advanced PIP mode operation.
Display size
Off
On
Adjusts the image display size on screen.
Off: Sets the normal image display size on screen.
On:
Sets the image display size approximately 95 % of the normal image display.
Off
On
Notes:
• This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p,
750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1125/50p/60p, 1250/50i
(Component Video, RGB, DVI, SDI, HDMI)
• This setting is invalid when two screen display, digital zoom or Multi screen is selected.
• When “Display size” is set to “On”, “H-Pos” and “V-Pos” in “Pos. /Size” can be adjusted.
• Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
1/3
Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Off
Off
Off
Enable
On
Off
Off
0
Off
Off
0