Panasonic DP-180 Instruction Manual

168

If You Have Any of These Problems

During Transmission Document doesn't 

feed/multiple feed

1.  Check that your document is free of staples and paper 

clips, and that it is not greasy or torn.

2.  Check that your document is the right type to send through 

an ADF by consulting. If your document has the 
characteristics listed, use the Platen instead.

 

For more details see Operating Instructions (For Copy & 
Network Scan Functions).

3.  Check that the document is loaded properly.

---

Does not stamp

Check Fax Parameter No. 4 and No. 28 settings.

140
141

Stamp too light

Replace stamp or refill ink.

Vertical lines on the 
transmitted document

Check own copy quality. If copy is OK, your machine has no 
problem, report to the receiving party that they have a problem. 
If copy is NG, clean the Document Scanning Area.

---

Transmitted document 
is blank

Add Paper

Replenish the recording paper.

---

Recording paper 
misfed

Remove the misfed paper.
(See Operating Instructions (For Copy & Network Scan 
Functions))

---

Recording paper 
doesn't advance into 
machine

Make sure that there is paper in the Paper Cassette. Follow the 
instructions for loading paper.

---

Recording paper 
doesn't eject after 
printing

Check to see if the recording paper is jammed inside of the 
machine.
Confirm that paper exit tray is clear and free from obstructions.

---

Document auto 
reduction doesn't work

Check Print Reduction settings.

Add Toner

Replace the Toner Cartridge.

---