Panasonic DP-180 Instruction Manual

172

715

TCP/IP connection timed out.

Check the Internet Fax Parameter settings. 
Verify the IP Address, Default Gateway IP 
Address, SMTP Server IP Address.

--

716

Cannot logon to the designated SMTP Server.

Check the SMTP Server IP Address setting. 
Contact the Network Administrator.

--

717

Incomplete SMTP Protocol transmission. SMTP 
Server’s hard disk may be full.

SMTP Server is defective.

 

Contact the Network Administrator.

--

718

Page Memory Overflow occurred while receiving 
printing data. The paper size selected within your 
application to print is larger than the paper size loaded 
in the cassette(s).

Check the document size and resolution.

 

Ask originator to resend in a supported size 
and resolution.

--

719

Received data via LAN is in a format that is not 
supported.

Ask the originator to resend with a supported 
file attachment format:

 

* In a TIFF-F format.
* Image data conforming to recording paper 

size.

--

720

Cannot connect to the POP Server. (Incorrect POP 
Server IP Address) POP Server is down.

Check the POP Server IP Address.

 

Contact the Network Administrator.

--

721

Cannot connect to the POP Server. (User Name or 
Password error)

Check the POP User Name and Password or 
the APOP settings.

 

Contact the Network Administrator.

--

722

Failed to obtain IP address from the DHCP server.

Check the 10Base-T/100Base-TX cable 
connection.

 

Confirm that the Internet Parameter and the 
DHCP server are correctly configured before 
turning On or turning Off the power.
Contact the Network Administrator.

725

DNS Server connection timed out. DNS Server is 
down.

Check the DNS Server IP Address.

 

Contact the Network Administrator.

--

726

Received an error response from the DNS Server.

Check the POP Server Name.

 

Check the SMTP Server Name.

--

728

The document was sent to the Internet Fax in an 
incompatible file format (PDF). Internet Faxing 
requires TIFF-F file format.
Note: PDF file format is only used when using the 

Scan-to-Email feature.

Change the Fax Parameter No. 177 (XMT 
FILE TYPE) to "TIFF/JPEG".

729

Failed to authenticate (SMTP Authenticaton) when 
connecting with the SMTP server.

Check the SMTP Authentication, User Name 
and Password.
Contact the Network Administrator.

730

Cannot retrieve the Journal nor program the Internet 
Parameters and the Auto Dialler remotely via email 
from a PC.

Check that the Fax Parameter No. 158 (PC 
REMOTE UPDATE) is set to "Valid".

731

The dialler buffer for manual dialling was full (50 
stations) when the Relay Transmission Request was 
received.

Request the originator to resend the Relay 
Transmission Request after the reserved 
communication is finished.

--