Panasonic TH-65PF30ER Operating Guide

Sound 

Normal 

Normalise 

Normal 

0 

0 
0 

Off 

Treble 

0 

Mid 

Sound Mode 

Balance 

Bass 

Surround 

1/2

Press to display the Sound menu.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

Select to adjust each item.

While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the 
ACTION (  ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Normalise 

Press to exit from adjust mode.

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDI 
Terminal Board for 3D (TY-FB30DHD3D)

2/2

Sound Out

Right Channel

Channel 1

Left Channel

Channel 1

Off

Level Meter

Off

SDI Sound Output

Selects left audio channel.

Selects right audio channel.

On: 

Enables audio output.

Off:  Disables audio output.

Sets audio channels to show in the audio level meter.

8 channels are displayed in the audio level meter; 4 channels 

each on both right and left sides of the display.

Off:  Hides the audio level meter.

1-8ch: Displays the audio level meter (1-8ch)

9-16ch: Displays the audio level meter (9-16ch)

Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.

Normal:  Emits the original sound.

Dynamic: Accentuates sharp sound.

Clear:  

Attenuates human voice.

Adjusts low pitch sounds.

Adjusts normal sounds.

Adjusts high pitch sounds.

Adjusts left and right volumes.

Select On or Off.