Panasonic TH-65PF30ER Operating Guide
47
Off
Portrait Setup
Seam hides video
Seam hides video
Off
1
Off
AI-synchronization
Viewing Area
Location
Location
16 : 9
Portrait Setup
Off
Portrait Setup
Seam hides video
Seam hides video
Off
1
Off
AI-synchronization
Viewing Area
Location
Location
16 : 9
Portrait Setup
Set up for Portrait
Press to exit from adjust mode.
7
Press to select AI-synchronization.
Press to select “Off” , “On”.
Adjust to equalize the brightness of the 3 displays when using Portrait setting.
The brightness depends
on each display’s setting.
Equalize the brightness
of all the displays.
Off
On
Notes:
• If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial
• If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial
values.
Picture menu: Colour, Hue, Input level (Advanced settings)
• This function cannot be adjusted during input from VIDEO terminal.
• This function cannot be adjusted during input from VIDEO terminal.
6
Press to select Viewing Area or Location.
Press to select each functions.
Notes:
• For HD signal videos, the “Viewing Area” is set at “16:9”,
• For HD signal videos, the “Viewing Area” is set at “16:9”,
and cannot be changed.
HD signal: 1125(1080) / 60i • 50i • 60p • 50p • 24p • 25p
• 30p • 24sF, 750(720) / 60p • 50p, 1250(1080) / 50i
• When “Viewing Area” is “16:9”, the aspect mode is set to “16:9”.
5
Viewing Area: Set a mode of image division for Portrait function.
Location: Set a location of image to be displayed for Portrait function.
Location: Set a location of image to be displayed for Portrait function.
When Portrait Setup is “On”:
Display the image of the selected location.
Display the image of the selected location.
When Portrait Setup is “Off”:
Represent an area of the selected Location at a normal
brightness and darken the rest of it.
Represent an area of the selected Location at a normal
brightness and darken the rest of it.
Location setting
Viewing Area and Location
The mode of image division and the Location by setting of Viewing Area is as follows.
Location 1
Location 2
Location 3
Location 1
Location 2
Location 3
Viewing Area : 4:3
Suitable to display 16:9 images. 4:3 images
extend transversely.
Both right and left sides of the image are
cut by 48 dots.
extend transversely.
Both right and left sides of the image are
cut by 48 dots.
Viewing Area : 16:9
4:3 images are displayed without changing
aspect ratio.
Although the images of each Location
overlap, you can adjust Pos./Size to display
the image normally. (see page 25)
aspect ratio.
Although the images of each Location
overlap, you can adjust Pos./Size to display
the image normally. (see page 25)
Undisplayed area (48 dots)
Viewing Area / Location
AI-synchronization