Panasonic KXPRWA10FX Operating Guide

Page of 76
6
For your safety
To prevent severe injury and loss of life/property, read this section carefully before using the 
product to ensure proper and safe operation of your product.
WARNING
Power connection
• Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may 
cause electric shock and/or excessive heat resulting in a fire.
• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the 
power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation 
defect from moisture, etc. resulting in a fire.
• Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an 
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has 
stopped emitting and contact an authorised service centre.
Installation
• To prevent the risk of fire or electrical shock, do not expose the product to rain or any type 
of moisture.
• Do not place or use this product near automatically controlled devices such as automatic 
doors and fire alarms. Radio waves emitted from this product may cause such devices to 
malfunction resulting in an accident.
CAUTION
Installation and location
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is 
installed near the product and is easily accessible.
Battery
• We recommend using the supplied batteries or additional/replacement batteries noted in 
the base unit’s operating instructions for replacement battery information. USE ONLY 
rechargeable Ni-MH batteries AAA (R03) size
.
• Do not mix old and new batteries.
• Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive 
and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be 
harmful if swallowed.
• Exercise care when handling the batteries. Do not allow conductive materials such as 
rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the 
batteries and/or the conductive material to overheat and cause burns.
• Charge the batteries provided with or identified for use with this product only, in accordance 
with the instructions and limitations specified in this manual.
• Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with 
the base unit (or charger). Failure to follow these instructions may cause the batteries to 
swell or explode.
PRSA_WA10FX(fx).book  Page 6  Thursday, July 25, 2013  1:30 PM