Panasonic S-ICX Manual
156
S-ICX (International) issued October 2000
S-ICX-50-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To set DND for another extension:
To cancel DND for another extension:
Hardware Requirements
•
N/A
Considerations
•
Forced DND override is available.
•
DND override function is available by Busy Override code.
DP to DTMF Signal Conversion
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from
DP to DTMF signalling when using a DP trunk. For instance, if you dial into a Voice Mail system
using a DP trunk, you can switch to DTMF signalling to communicate with the Voice Mail system.
DP to DTMF signalling when using a DP trunk. For instance, if you dial into a Voice Mail system
using a DP trunk, you can switch to DTMF signalling to communicate with the Voice Mail system.
The System can automatically change DP to DTMF tones based on the incoming and outgoing timers.
Operation
To switch from DP to DTMF dialling:
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the DND Set by Other Phone code (default = 740
[UK/HK] or 740# [Taiwan, Malaysia, Indonesia]).
Enter DND EXT # displays
3. Dial the extension number.
DND Set displays on affected extension
4. Replace the handset or press the ON/OFF key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the DND Cancel by Other Phone code (default = 750
[UK/HK] or 750# [Taiwan, Malaysia, Indonesia]).
Enter DND EXT # displays
3. Dial the extension number.
DND Cleared displays
4. Replace the handset or press the ON/OFF
key.
Action
Result
1. Press the * key or the # key.