Panasonic S-ICX Manual

296

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 7. SLT Features

Section 700 - Operation

•

External relays, amplifier, and speakers are required for external paging. 

•

FF1-0-02: Paging Override

•

FF1-0-03: Extension COS (Paging)

•

FF1-0-04: Trunk COS (Paging)

•

FF1-2: Dial Plan

•

FF2: Trunk COS

•

FF3: Extension COS

•

If an external paging system has been connected, pages can be made to Paging groups 0-9 
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.

•

An extension can belong to more than one paging group.

•

Only one page may be performed at a time. If you attempt to make a page while another 
extension is paging, you will receive a busy signal unless your system allows Paging Override.

•

Beginning with Version 4.5 and higher, the paging system can be set to “timeout” if a page is 
longer than the specified length of time (0 to 255 seconds). If this feature is set and the timeout 
period has elapsed, the page originator’s handset will emit a Fast Busy Tone.

Version 4.5 and higher

This feature allows the user to monitor the sounds in a room from another extension or room. The 
transmitter in the telephone handset is used as a remote “microphone” for monitoring these sounds. 

4.   Make your announcement.

5.   Replace the handset.

1.   Lift the handset.

Intercom dial tone

2.   Enter the Meet Me Answer code (default = ##).

Connected to specified party