Panasonic TH-65VX300ER Operating Guide

Connections

Video equipment connection

SLOT:

Terminal board (optional
accessories) insert slot

(see page 3)

Note:

The right side slot is for factory use only.
The terminal board with 1-slot width
does not function when installed in the
right side slot.

COMPONENT/RGB IN: Component/RGB Video Input

Terminal

AV IN (HDMI): HDMI Input Terminal
Connect to video equipment such as VCR or DVD
player.

PC IN: PC Input Terminal

Connect to video terminal

of PC or equipment with Y,

) and P

) output.

3D IR TRANSMITTER:
Connect the 3D IR
TRANSMITTER (optional
accessory).

SERIAL:

Control the Plasma Display
by connecting to PC.

Terminals are on the bottom

side of the Plasma Display.

LAN: Connect to a

network to control
the unit.

How to use the Ferrite core

Notes:
•  Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.
•  To connect a device using 100BASE-TX, use “category 5” LAN cable.
•  Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge.
  Do not touch the LAN terminal or a metal part of the LAN cable.
•  For instructions on how to connect, consult your network administrator.

Display (main unit, rear)

Hub or broadband router

LAN cable
(not supplied)

COMPUTER

Less
than
10 cm

Ferrite core
(supplied)

Installing the Ferrite core

Pull back the tabs
(in two places)

Wind the cable
twice

Open

Press the cable
through and close