Garmin GPSMAP 521s 010-00760-01 Leaflet

Product codes
010-00760-01
Page of 42
Technical Reference for Garmin NMEA 2000 Products 
7
NMEA 2000 Checklist
Configuring the Wind Angle Filter
The wind angle filter governs how quickly the NMEA 2000-compatible display device shows a change in the wind angle. A lower filter setting 
shows changes in the wind angle more gradually, and may stabilize the display.
To configure the wind angle filter:
1.  While viewing the NMEA 2000 device information, select 
Config
 > 
Wind Angle Filter
.
2.  Choose from the following options to adjust the filter settings.
Off
—the wind angle data is not filtered.
On
—select a lower number to update the display device less often, and help the gauge needle or wind angle number to move or change 
more steadily.
Auto
—automatically adjusts the filter settings based on wind conditions.
Configuring the GWS 10 if the Filter and Offset Selections Are Not Displayed
Depending on the version of software loaded on your Garmin marine instrument, the specific configuration options may not be displayed on the 
configuration screens.
To configure the wind angle offset if the menu option is not displayed:
1.  Select 
Generic Configuration
 to specify data for the filter and offset settings.
2.  Enter the following command: 
“ANGLEOFFSET=”
3.  Follow the command with a number between 0 and 359, in degrees (for example: ANGLEOFFSET=180).
To configure the wind angle filter if the menu option is not displayed:
1.  Select 
Generic Configuration 
to specify data for the filter and offset settings.
2.  Enter the following command: 
“ANGLEFILTER=” 
3.  Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the 
Automatic setting (for example: ANGLEFILTER=12).
To configure the wind speed filter:
1.  Select Generic Configuration to specify data for the filter and offset settings.
2.  Enter the following command: 
“SPEEDFILTER=”
3.  Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the 
Automatic setting (for example: SPEEDFILTER=215).