Toshiba 28" Toshiba HD Ready WLAN TV Important Safety Instructions

English - 13 -

Watching Recorded Programmes

Select

Recordings from the Media Browser menu.

Select a recorded item from the list (if previously

recorded). Press the

OK button to view the Play

Options. Select an option then press OK button.

Note: Viewing main menu and menu items will not be

available during the playback.

Press the

Stop button to stop a playback and return

to the

Recordings.

Slow Forward

If you press

Pause button while watching recorded

programmes, the slow forward feature will be

available. You can use

Rapid advance button to

slow forward. Pressing

Rapid advance button

consecutively will change slow forwarding speed.

Recording Configuration

Select the

Recording Settings item in the Media

Browser>Settings menu to configure the recording

settings.
Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your PIN is

required to use the

Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you have

defined the PIN(is requested depending on the country

selection) during the

First Time Installation use the PIN

that you have defined.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.
If “

USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser Menu

You can play photo, music and movie files stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the

Menu button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the Menu button

again will exit from this screen.

You can set your

Media

Browser preferences by using the Settings menu.

Loop/Shuffle Mode Operation

Start playback with the

Play

button and activate

All files in the list will be

continuously played in original

order

Start playback with the

button and activate

The same file will be played

continuously (repeat)

Start playback with the

Play

button and activate

All files in the list will be

played once in random order

Start playback with the

Play

button and activate

All files in the list will be

continuously played in the

same random order.

Custom Boot Up Logo

You can personalize your TV and see your favorite

image or photo on the screen each time your TV boots

up. To do this, copy your favorite image files into a USB

disk and open them from the

Media Browser menu.

When you have chosen the desired image, highlight it

and press

OK to view it in full screen. Press OK again

to choose the image as custom logo. A confirmation

message will be displayed. Select

Yes and press OK

again. If the image is suitable

(*) you will see it on the

screen during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will return

to using the default logo, if any.
(*) Images should have an aspect ratio of 16:9 and they should

be in .jpg, .jpeg or .jpe file formats. Only files with sizes no

greater than 300KB are supported. The image cannot be

set as boot logo, which’s resolution doesn’t appear on the

info banner.

FollowMe TV (if available)

With your mobile device you can stream the current

broadcast from your smart TV using the

FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: This application may not be compatible with all mobile

devices. HD channels are not supported and both of the

devices must be connected to the same network.