Toshiba 49" Toshiba XUHD WLAN TV Important Safety Instructions

English   - 19 -

Navigate (Directional buttons): Press the 

Directional buttons to navigate through the channels 

and programmes.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed 

information about selected programmes.

Filter (Blue button): Views filtering options.

Use the directional buttons to highlight a programme 

and press 

OK button to display Event Options menu. 

The following options are available.
Select Channel: Using this option, you can switch to 

the selected channel.

Set Timer on Event / Delete Timer on Event: After 

you have selected a programme in the EPG menu, 

press the 

OK button. Select Set Timer on Event 

option and press the 

OK button. You can set a timer 

for future programmes. To cancel an already set timer, 

highlight that programme and press the 

OK button. 

Then select 

Delete Timer on Event option. The timer 

will be cancelled.

Press the 

Text button to enter. Press again to activate mix 

mode, which allows you to see the teletext page and the 

TV broadcast at the same time. Press once more to exit. If 

available, sections in the teletext pages will become colour-

coded and can be selected by pressing the coloured buttons. 

Follow the instructions displayed on the screen.

Press the 

Text button to view digital teletext information. 

Operate it with the coloured buttons, cursor buttons 

and the 

OK button. The operation method may differ 

depending on the contents of the digital teletext. Follow 

the instructions displayed on the digital teletext screen. 

When the 

Text button is pressed again, the TV returns 

to television broadcast.

Your TV is capable of finding and updating the firmware 

automatically via the broadcast signal or via Internet. 

On the main menu select 

System>Settings and then 

More. Navigate to Software upgrade and press the 

OK button. In Upgrade options menu select Scan 

for upgrade and press OK button to check for a new 

software upgrade.
If a new upgrade is found, it starts to download 

the upgrade. After the download is completed, 

a warning will be displayed, press 

OK button to 

complete software upgrade process and restart 

TV.

Your TV will search for new upgrades at 3:00 o’clock if 

Automatic scanning option in the Upgrade options 

menu is set to 

Enabled and if the TV is connected 

to an aerial signal or to Internet. If a new software is 

found and downloaded successfully, it will be installed 

at the next power on. 

Make sure the power cord is plugged in securely to a 

wall outlet. Press the Power button on the TV. 

• Check if you have correctly tuned the TV.
• Low signal level can cause picture distortion. Please 

check antenna connections.

• Check if you have entered the correct channel 

frequency if you have performed manual tuning. 

• TV is not receiving any signal. Make sure the correct 

source has been selected.

• Is the antenna connected properly? 
• Is the antenna cable damaged? 
• Are suitable plugs used to connect the antenna? 
• If you are in doubt, consult your dealer.

• Check if the TV sound is muted. Press the Mute 

button or increase the volume to check.

• Sound is coming from only one speaker. Check the 

balance settings from Sound menu.

• The batteries may be exhausted. Replace the 

batteries.

• The batteries maybe inserted incorrectly. Refer to 

the section “Inserting the Batteries into the Remote”. 

• It is possible that no device is connected.
• Check the AV cables and connections from your 

device.

• Check the device is switched on.