Toshiba 49" Toshiba XUHD WLAN TV Important Safety Instructions

English   - 18 -

This setting configures the power up mode preference. 

Last State and Standby 

options are available.

Enable or disable the virtual remote feature.

With this setting you can enable and disable CEC functionality completely. Press Left 

or Right button to enable or disable the feature.

This function allows the connected HDMI-CEC compatible device to turn on the TV 

and switch to its input source automatically. Press 

Left or Right button to enable or 

disable the feature.

To hear the TV audio from the connected compatible audio device set as 

Amplifier. 

You can use the remote control of the TV to control the volume of the audio device.

Press 

OK to open the Smart Remote menu screen. Using this screen you can discover 

and connect the remote controller devices to your TV wirelessly.

Displays Open Source Software license information.

Displays automatic tuning options. 

Digital Aerial: Searches and stores aerial DVB stations. 

Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores 

analogue stations. 

Satellite: Searches and stores satellite stations.

This feature can be used for direct broadcast entry.

Searches for the linked channels in the broadcast system. 

Digital Aerial: Searches for aerial 

network channels. 

Digital Cable: Searches for cable network channels.

You can use this setting for fine tuning analogue channels. This feature is not available if no 

analogue channels are stored.

Displays satellite settings. 

Satellite list: Displays available satellites. You can Add, Delete 

satellites or 

Edit satellite settings on the list. Antenna installation: You can change satellite 

anntenna settings and/or start a satellite scan. 

SatcoDX: You can upload or download SatcoDX  

data using the related options.

Displays installation settings menu. 

Standby Search (Optional): Your TV will search for new 

or missing channels while in standby. Any new found broadcasts will be shown.

Use this setting to clear channels stored. This setting is visible only when the 

Country option 

is set to Denmark, Sweden, Norway or Finland.

This setting allows you to select only the broadcasts within the selected network to be listed 

in the channel list. This feature is available only for the country option of Norway.

Deletes all stored channels and settings, resets TV to factory settings.

Displays Fransat options. 

Displays parental control options. Enter the PIN number you have defined in the initial 

installation to view current settings.

Information Displays system information.
Reception 

Information  Displays current satellite reception information.
CAS-

Displays current CAS module information.

Displays software upgrade options.