Moxa AWK-6232-M12-US-T Ethernet Radio (Open Item) Specification Guide
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions
Dual RF
Wireless Redundancy
Dual RF
Wireless Redundancy
AWK-6232 Series
Industrial IEEE 802.11a/b/g/n IP68 dual-RF wireless AP/bridge/client
Moxa’s AWK-6232 3-in-1 outdoor wireless AP/bridge/client meets
the growing need for faster data transmission speeds and wider
coverage by supporting IEEE 802.11n technology with a net data rate
of up to 300 Mbps. The AWK-6232 avoids interruptions in WLAN
transmissions with its dual 2.4/5 GHz RF modules, which allow two
independent wireless connections over different frequencies. The
AWK-6232 is compliant with the essential sections of EN 50155,
covering operating temperature, power input voltage, surge, ESD and
vibration. In addition, the AWK-6232 is housed in an IP68 metal casing
with M12 connectors for total protection against dust, water, vibration,
and other environmental effects.
the growing need for faster data transmission speeds and wider
coverage by supporting IEEE 802.11n technology with a net data rate
of up to 300 Mbps. The AWK-6232 avoids interruptions in WLAN
transmissions with its dual 2.4/5 GHz RF modules, which allow two
independent wireless connections over different frequencies. The
AWK-6232 is compliant with the essential sections of EN 50155,
covering operating temperature, power input voltage, surge, ESD and
vibration. In addition, the AWK-6232 is housed in an IP68 metal casing
with M12 connectors for total protection against dust, water, vibration,
and other environmental effects.
Improved Higher Data Rate and Bandwidth
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology to improve the capacity of multiple data stream
• MIMO technology to improve the capacity of multiple data stream
transmits and receives
• Increased channel width with channel bonding technology
Industrial and Outdoor Rated Features for Critical
Environments
Environments
• IP68-rated metal housing and -40 to 75°C wide operating
temperature
• Anti-vibration M12 design and waterproof/dust-tight RJ45
connectors
• Wall, DIN-Rail, and pole mounting options for versatile outdoor
installation
Introduction
Specifications
›
IEEE 802.11a/b/g/n compliant
›
Dual-RF design: 2.4 GHz and/or 5 GHz RF bands
›
M12 anti-vibration connectors
›
Industrial grade QoS (WMM) and VLAN supported
›
Compliant with essential sections of EN 50155
›
Rugged IP68-rated housing and -40 to 75°C operating
temperature
WLAN Interface
Standards:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power-over-Ethernet Plus
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power-over-Ethernet Plus
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power:
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO:
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power:
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO:
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)