Puls CD5.243 DC/DC Converter Specification Guide
CD5.243
CD-Series
DC/DC Converter 24V, 4A
21. A
CCESSORIES
ZM1.WALL Wall mounting bracket
This bracket is used to mount specific DIMENSION units onto a flat surface without utilizing a DIN-Rail. The two
aluminum brackets and the black plastic slider of the unit have to be removed, so that the two steel brackets can be
mounted.
aluminum brackets and the black plastic slider of the unit have to be removed, so that the two steel brackets can be
mounted.
Fig. 21-1 ZM1.WALL Wall mounting bracket
Fig. 21-2 Assembled wall mounting bracket *)
*) Picture of the DC/DC converter is for representation only
ZM11.SIDE Side mounting bracket
This bracket is used to mount Dimension units sideways with or without utilizing a DIN-Rail. The two aluminum
brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.
brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
the steel bracket.
Fig. 21-3
ZM11.SIDE Side mounting bracket *)
Fig. 21-4
Side mounting with DIN-rail brackets *)
*)
Picture of the DC/DC converter is for representation only
Oct 2009 / Rev. 1.0 DS-CD5.243-EN
All parameters are specified at 24V, 4A, 12Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
All parameters are specified at 24V, 4A, 12Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
16/21