Elac BS 244 31446 Leaflet
Product codes
31446
•
In the treble, ELAC uses its class leading JET tweeter, recognised worldwide as one of the very finest available.
Its internal design has been reworked, which has resulted in
an even more linear frequency response and improved
harmonic distortion.
an even more linear frequency response and improved
harmonic distortion.
•
A key new feature is an acoustic tuning element made from
porous foam called the “JET DC” (JET Dispersion Control)
This allows the treble to be adapted to particular room
settings – especially for hall-like spaces with a lot of glass,
wood floors, etc. The JET DC incorporates both a directional
characteristic as well as a frequency response correction, so
that instruments and voices can be pinpointed precisely -
even in difficult room settings with many reverberant
surfaces.
This allows the treble to be adapted to particular room
settings – especially for hall-like spaces with a lot of glass,
wood floors, etc. The JET DC incorporates both a directional
characteristic as well as a frequency response correction, so
that instruments and voices can be pinpointed precisely -
even in difficult room settings with many reverberant
surfaces.
•
The cabinet is ported with a bass
reflex tube with optimally curved
openings to prevent ventilation
noise.
reflex tube with optimally curved
openings to prevent ventilation
noise.
•
To fine-tune the bass, there is a
two-part bass control plug. This
allows the bass reflex tube to be
closed, in two stages, helping
reduce excessive bass caused
by room acoustics such as when
the speaker is placed near a
wall. This allows easy bass
two-part bass control plug. This
allows the bass reflex tube to be
closed, in two stages, helping
reduce excessive bass caused
by room acoustics such as when
the speaker is placed near a
wall. This allows easy bass
adjustment to suit your individual preference.
•
The BS 244’s cabinet features an internal bracing ring to
minimise resonances.
minimise resonances.
•
On the bottom of the cabinet, there is an M4 threaded insert so
the BS 244 can be attached to LS 70 speaker stands, which are
available as an accessory.
the BS 244 can be attached to LS 70 speaker stands, which are
available as an accessory.
•
High-quality ELAC bi-wiring terminals are used with separate
connections for bass and middle/treble drivers. The angled
adapter terminations are easily accessible and are especially
suitable for larger cables (16 mm²) and high-quality spade
terminals (e.g. WBT products).
connections for bass and middle/treble drivers. The angled
adapter terminations are easily accessible and are especially
suitable for larger cables (16 mm²) and high-quality spade
terminals (e.g. WBT products).
Versions
: Mocha, Cherry Veneer, Black High Gloss
Specifications ELAC BS 244
Dimensions Height x Width x Depth
(with/without/ frame)
(with/without/ frame)
330 x 200 x 270/282 mm Crossover Frequency
2600 Hz
Weight
8.5 kg
Nominal Power Handling
80 W
Type
2-way, bass reflex
Peak Power Handling
120 W
Woofer
180 mm AS-XR cone
Frequency Range
38 - 50000 Hz
Midrange
Sensitivity
88 dB/2.8V/m
Tweeter
JET III
Nominal impedance
4 ohms
Rec. amplifier Power at Nominal
Impedance
Impedance
30 – 200 W / Channel
Minimum impedance
3.5 ohms at 190 Hz