Greenlee NC-500 Specification Guide
www.greenlee.com
Communications
291
Tel:
800.435.0786
Fax:
800.451.2632
800.451.2632
Tel:
800.435.0786
Fax:
800.524.2853
800.524.2853
Tel:
+1.815.397.7070
Fax:
+1.815.397.9247
+1.815.397.9247
USA
CANAD
A
INTERNA
TIONAL
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
=
NETcat
®
Pro 2 NC-500
• Test and troubleshoot telephone, data and coax wiring.
• NETcat Pro 2 New Features:
• NETcat Pro 2 New Features:
– Gigabit device capability detection (still detects 10baseT and 100baseT too).
– Cable type, velocity of propagation library, user editable.
– Power over Ethernet (PoE) detection.
– Memo pad.
– Cable type, velocity of propagation library, user editable.
– Power over Ethernet (PoE) detection.
– Memo pad.
• Detect split pairs, short circuits, broken and crossed wires.
• Step TDR technology shows length to open or short of all pairs.
• Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.
• Test patch cords and remote jacks.
• Touch-screen control, included stylus slots into main unit.
• Large icons ensure easy use with your finger too.
• Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is
• Step TDR technology shows length to open or short of all pairs.
• Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.
• Test patch cords and remote jacks.
• Touch-screen control, included stylus slots into main unit.
• Large icons ensure easy use with your finger too.
• Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is
highly visible in dark or brightly lit areas.
• Remote test and ID unit stores in base of main unit.
• Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory
• Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory
kit along with carrying case).
• Tone generator with four selectable precision frequency tones, compatible with
Greenlee advanced digital signal processing probes.
• Operates on single 9V battery with low battery indication.
STRUCTURED WIRING TESTERS
CAT. NO.
UPC NO.
DESCRIPTION
NC-500
23639
NETcat Pro 2 Digital VDV Wiring Troubleshooter
NC-510
23640
NETcat Pro 2 Accessory Kit w/carry case
SPECIFICATIONS
Dimensions
3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm)
Weight
0.45 lb. (200 g)
Power
Requirements
Requirements
9V Alkaline battery (PP3)
User Interface
Display LCD
Viewing Area
Backlight
Buttons
Viewing Area
Backlight
Buttons
Dot Pixels: 128 x 128 dots
60.0 x 58.4
White LED
LCD touch-screen, Single
momentary contact push button
60.0 x 58.4
White LED
LCD touch-screen, Single
momentary contact push button
Environmental
Operating
Temperature
Temperature
Storage
Temperature
Temperature
0°C to 50°C
-20°C to 70°C
Interface
Connections
Connections
RJ45 shielded jacks
F-type threaded female coaxial connectors
F-type threaded female coaxial connectors
TDR
Calibration
TDR Range
Calibration
TDR Range
User selectable based on a known cable length.
40% to 100% in steps of 1%
0 to 2000 ft. -
40% to 100% in steps of 1%
0 to 2000 ft. -
Resolution
1 ft. (0.3 m)
Accuracy to
Open/Short
Open/Short
±4% or 2 ft. (0.6 m) whichever is greater
Remote
Identifier
Identifier
2000 ft. (609.6 meters) maximum distance
Wiremap
358 ft (100 meters) maximum distance
NC-500
NC-510
(NC-500 not included)
(NC-500 not included)
NC-500 Contents:
• NETcat Pro 2 main unit with stylus
• Removable remote jack and patch lead test and ID unit
• Twisted-pair (modular RJ45), coax (F) and alligator clip
• NETcat Pro 2 main unit with stylus
• Removable remote jack and patch lead test and ID unit
• Twisted-pair (modular RJ45), coax (F) and alligator clip
test cords
• 9V alkaline battery
NC-510 NETcat Pro 2 Accessory Kit Contents:
• Seven additional remote jack test and ID units,
• Seven additional remote jack test and ID units,
RJ45 and F (male)
• Carrying case to hold additional remote test ID units
and content of NC-500 main kit
C-510