Moxa NPort P5150A Series Specification Guide
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Serial-to-Ethernet Device Servers
Appearance
NPort
®
P5150A
DK-35A DIN rail Kit
Available Accessory
Easy to Troubleshoot
Overview
Surge-protected Serial, Ethernet, and Power Lines
3-step Web-based Configuration
NPort
®
P5150A Series
1-port RS-232/422/485 PoE serial device servers
NPort® P5150A device servers are designed to make serial devices
network-ready in an instant. It is a PD device and is IEEE 802.3af
compliant, so it can by powered by a PoE PSE device without an
additional power supply. Use the NPort® P5150A device servers to
network-ready in an instant. It is a PD device and is IEEE 802.3af
compliant, so it can by powered by a PoE PSE device without an
additional power supply. Use the NPort® P5150A device servers to
The NPort® P5150A’s 3-step web-based configuration tool is
straightforward and user-friendly. The NPort® P5150A’s web console
guides users through 3 simple configuration steps that are necessary
to activate the serial-to-Ethernet application. With this speedy 3-step
straightforward and user-friendly. The NPort® P5150A’s web console
guides users through 3 simple configuration steps that are necessary
to activate the serial-to-Ethernet application. With this speedy 3-step
NPort® P5150A device servers support SNMP, which can be used to
monitor all units over Ethernet. Each unit can be configured to send
trap messages automatically to the SNMP manager when user-defined
errors are encountered. For users who do not use SNMP manager, an
monitor all units over Ethernet. Each unit can be configured to send
trap messages automatically to the SNMP manager when user-defined
errors are encountered. For users who do not use SNMP manager, an
Surge, which is typically caused by high voltages that result from
switching and lightning transients, is a common threat to all electrical
devices. Moxa’s leading-edge surge immunity solution, which is
applied to the NPort® P5150A’s serial, power, and Ethernet lines, is
tested and proven compliant with IEC 61000-4-5. This state-of-the-
switching and lightning transients, is a common threat to all electrical
devices. Moxa’s leading-edge surge immunity solution, which is
applied to the NPort® P5150A’s serial, power, and Ethernet lines, is
tested and proven compliant with IEC 61000-4-5. This state-of-the-
give your PC software direct access to serial devices from anywhere
on the network. The NPort® P5150A device servers are ultra lean,
ruggedized, and user friendly, making simple and reliable serial to
Ethernet solutions possible.
on the network. The NPort® P5150A device servers are ultra lean,
ruggedized, and user friendly, making simple and reliable serial to
Ethernet solutions possible.
web-based configuration, a user only needs
to spend an average of 30 seconds to
complete the NPort® settings and enable the
application, saving a great amount of time
and effort.
to spend an average of 30 seconds to
complete the NPort® settings and enable the
application, saving a great amount of time
and effort.
e-mail alert can be sent instead. Users can define the trigger for the
alerts using Moxa’s Windows utility, or the web console. For example,
alerts can be triggered by a warm start, a cold start, or a password
change.
alerts using Moxa’s Windows utility, or the web console. For example,
alerts can be triggered by a warm start, a cold start, or a password
change.
art surge protection provides a robust
serial-to-Ethernet solution that can protect
electrical devices from voltage spikes and
withstand electrically noisy environmental
conditions.
serial-to-Ethernet solution that can protect
electrical devices from voltage spikes and
withstand electrically noisy environmental
conditions.
›
IEEE 802.3af-compliant PoE PD equipment
›
Speedy 3-step web-based configuration
›
Surge protection for serial, Ethernet, and power lines
›
COM port grouping and UDP multicast applications
›
Screw connectors for secure installation
›
Real COM/TTY drivers for Windows and Linux
›
Standard TCP/IP interface and versatile TCP and UDP operation
modes
RS-232/422/485
Power input
Screw power jack
12 to 48 VDC
Reset button
Ethernet
RJ45 PoE
10/100 Mbps
Power over Ethernet