Moxa IMC-101-S-SC-80-T Specification Guide
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Ethernet Media Converters
Industrial Ethernet-to-fiber media converters
The IMC-101 industrial media converters provide industrial-grade
media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST
connectors). The IMC-101 converters’ reliable industrial design is
excellent for keeping your industrial automation applications running
continuously, and each IMC-101 converter comes with a relay output
warning alarm to help prevent damage and loss. The IMC-101 media
converters are designed for harsh industrial environments, such
media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST
connectors). The IMC-101 converters’ reliable industrial design is
excellent for keeping your industrial automation applications running
continuously, and each IMC-101 converter comes with a relay output
warning alarm to help prevent damage and loss. The IMC-101 media
converters are designed for harsh industrial environments, such
as in hazardous locations (Class 1, Division 2/Zone 2, DNV, and GL
Certification), and comply with FCC, UL, and CE standards. The IMC-
101 series is available in models that support an operating temperature
from 0 to 60°C, and an extended operating temperature from -40 to
75°C. All IMC-101 series converters are subjected to a 100% burn-in
test.
Certification), and comply with FCC, UL, and CE standards. The IMC-
101 series is available in models that support an operating temperature
from 0 to 60°C, and an extended operating temperature from -40 to
75°C. All IMC-101 series converters are subjected to a 100% burn-in
test.
Introduction
Specifications
IMC-101 Series
›
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
›
Link Fault Pass-Through (LFP)
›
Power failure, port break alarm by relay output
›
Redundant power inputs
›
-40 to 75°C operating temperature range (T models)
›
Designed for hazardous locations (Class 1 Div. 2/Zone 2)
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
Interface
RJ45 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST connectors)
LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M
(Fiber port), FDX/COL (Fiber port)
DIP Switches: 100BaseFX Full/Half duplex selection, port break alarm
mask
Alarm Contact: One relay output with current carrying capacity of 1 A
@ 24 VDC
Fiber Ports: 100BaseFX (SC/ST connectors)
LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M
(Fiber port), FDX/COL (Fiber port)
DIP Switches: 100BaseFX Full/Half duplex selection, port break alarm
mask
Alarm Contact: One relay output with current carrying capacity of 1 A
@ 24 VDC
Optical Fiber
100BaseFX
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-14 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km a
4 km b
40 km c
Saturation
-6 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight: 630 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight: 630 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 45 VDC redundant inputs
Input Current: 160 mA @ 24 VDC
Connection: Removable terminal block
Overload Current Protection: 1.1 A
Reverse Polarity Protection: Present
Input Current: 160 mA @ 24 VDC
Connection: Removable terminal block
Overload Current Protection: 1.1 A
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 508, UL 60950-1
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX
Zone 2 Ex nC IIC
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX
Zone 2 Ex nC IIC
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A