Weed Instrument 2R07 Fiber Optic Receiver Specification Guide
Weed Instrument Co., Inc.
Fiber Optics Division
Phone: 800-880-9333
512-434-2850
512-434-2850
Fax: 512-434-2851
Email:
fiberop@weedinstrument.com
Visit: www.weedinstrument.com
Important Notice - Before utilizing the product, the user should
determine the suitability of the product for its intended use. The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective. In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.
determine the suitability of the product for its intended use. The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective. In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.
Publication Number:
RM0900136 Rev. 12/03
Weed Instrument
Fiber Optics
EOTec 2000 Model
2R07
FOR, 0 – 10VDC
Installation Instructions
Analog Link
Fiber Optic Receiver (FOR)
Converts a Fiber Optic Signal to
the 0 to 10VDC Process Signal
850nm, Multi-Mode
ST Connection
ST is a trademark of AT&T
Power Requirements
22 to 26VDC @ 200mA per
unit
unit
Power Connections
Pluggable, screw terminal
block at the top-front of the
housing
–-or—
block at the top-front of the
housing
–-or—
Via the interconnection Bus
and a Model 2A56 Universal
AC Input Power Supply
Module
and a Model 2A56 Universal
AC Input Power Supply
Module
Analog Output Range
0 to 10VDC
Analog Output Impedance
< 0.1 Ohm
Unit Accuracy
0.05% @ 25°C
Ambient Effect
0.05% / 50°C change
Ambient Range
-40 to 85°C
0
to
95%
Humidity
(Non-condensing)
System Response
System Response
< 2ms (10 to 90% step)
Optical Wavelength
850nm
Optical Cable (typical)
62.5/125µm
--or--
200/230µm multi-mode
simplex (one) fiber optic
cable
--or--
200/230µm multi-mode
simplex (one) fiber optic
cable
Optical Loss Budget
25dB, 62.5/125 fiber, mated
with a 2T07
with a 2T07
31dB, 62.5/125 fiber, mated
with a 2T10
with a 2T10
37dB, 200/230 fiber, mated
with a 2T07
with a 2T07
43dB, 200/230 fiber, mated
with a 2T10
with a 2T10
Optical Connectivity
ST compatible
Electrical Connections Pluggable,
Cage
Clamp
Screw Terminal Blocks,
Accept 12 to 24 AWG
Accept 12 to 24 AWG
Mounting
35mm DIN Rail
Weight
<
9oz
Flammability Rating
UL V-0
Specifications