Weed Instrument 2K02 Contact Closure Specification Guide
Connect the DIN Rail via the End Clamp (2A09)
to protective earth ground with low impedance.
The modules are grounded to PE when they are
snapped onto the DIN Rail.
to protective earth ground with low impedance.
The modules are grounded to PE when they are
snapped onto the DIN Rail.
Further technical information can be obtained by
contacting Weed Instrument Co., Inc., Fiber Optic
Products Group.
Phone:
contacting Weed Instrument Co., Inc., Fiber Optic
Products Group.
Phone:
1.800.880.9333
512.434.2850
Fax:
Fax:
512.434.2851
Email:
fiberop@weedinstrument.com
Visit:
www.weedinstrument.com
Safety and Warning Information
Important Notice - Before utilizing the product, the user should
determine the suitability of the product for its intended use. The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective. In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.
determine the suitability of the product for its intended use. The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective. In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.
Weed Instrument Co., Inc.
Round Rock, Texas, USA
www.weedinstrument.com
Publication Number:
RM0900132 Rev. 3/04
Weed Instrument
2K02
EOTec 2000 Multi-Channel
Contact Closure
Two Output Module
Provides transfer of two additional
channels of contact closure
information to a mated receive
module
Installation Instructions
Fiber Optics
Connections
Channel A
Channel B
1. NORMALLY
OPEN
2. COMMON
3. COMMON
3. COMMON
4.
NORMALLY CLOSED
1 2 3 4
Note: Use shielded cable for all connections.