Molex ENDR2FB5 Industrial RJ45 Connector Specification Guide

Physical Media

Standard PCB Board Receptacle

  Part Number 

Description

  ENSR1FB5 

Receptacle with PC Board

  ENSR1FB5C305 

Receptacle with PCB & 12” of cable (10 Base-T)

  ENSR2FB5C305 

Receptacle with PCB & 12” of cable (568A)

  ENSR3FB5C305 

Receptacle with PCB & 12” of cable (568B)

Highly flexible solution that enables an OEM or end-user to solder a cable lead 
to an internal Ethernet connection

Nitrile Rubber

Acrylonitrile-

Butadiene-Styrene (ABS)—standard 
version, Acrylonitrile-Styrene-Acrylate 
(Luran™ S778 T/TE)—UV stabilized 
version
Knockout Hole for Receptacle  

1.031

UNC 1” - 14

-20  to 80 C

5 dB @ 100 MHZ

Per IEC 60068-2-6

IEC IP67

Receptacles 

(continued)

Bulkhead Passthrough

To bring Ethernet into a cabinet or control box, simply create the sealed 
connection on the outside of the enclosure, and run a commercial patch cord 
from the backside RJ-45 jack to your PLC, I/O, or Ethernet Control Board. No 
conduit entry is required. UV stabilized versions for outdoor use can be 
ordered by adding a "V" to the end of a part number

  Part Number 

Description

  ENSP1F5 

RJ-45 Bulkhead passthrough with backside jack

  ENSP1F5C305 

RJ-45 Bulkhead passthrough with 12” of patch cord

  ENSP6F5 

RJ11 Bulkhead passthrough with backside jack

TIA/EIA Rating

Category 5e compliant

Category 5e 

   

 

       compliant

Category 5 compliant

Not Rated—additional

  

 

customer 

termination

  

 

is 

required

RJ-45 Jack

Copper alloy w/30 m-inches 

                        gold alloy
Underplating  

2.54 microns of nickel

250, minimum

1.5 Amp

125 VDC

Receptacle Specifications