Hirschmann BAT-RUSW99AP9F9AO7T1T999ZH Ethernet Radio Specification Guide
Hirschmann Automation and Control GmbH
www.beldensolutions.com
10-03-2015
Page 1 of 2
Product information
OpenBAT-R - BAT-RUSW99AP9F9AO7T1T999ZH09.00.5103
OpenBAT-R - BAT-RUSW99AP9F9AO7T1T999ZH09.00.5103
Industrial Ethernet:Industrial Wireless LAN:Chassis:OpenBAT:OpenBAT-R
Name
OpenBAT-R
Rugged wireless LAN access point and/or client for use in industrial environments. Robust metal housing for mounting on DIN rails.
Delivery informations
Availability
available
Product description
Description
Rugged wireless LAN access point and/or client for use in industrial environments. Robust metal housing for mounting on DIN rails.
Port type and quantity
RJ45 LAN combo port: 10/100/1000BASE-TX, 1000BASE-SX/LX; LAN port 10/100BASE-TX RJ45 jack
Radio protocol
IEEE802.11a/b/g/h/n WLAN interface as per IEEE802.11n, up to 450MBit/s gross bandwidth.
Type
BAT-RUSW99AP9F9AO7T1T999ZH09.00.5103
Order No.
BAT-RUSW99AP9F9AO7T1T999ZH09.00.5103
Supported Radio Standards
1st WLAN interface as per IEEE802.11n
More Interfaces
Ethernet
RJ45 LAN combo-port: 10/100/1000BASE-TX, 1000BASE-SX/LXLAN port 10/100BASE-TX RJ45 socket
V.24 interface
Configuration interface (COM) AT modem connection For automatic P2P connections verified over V.24 (train carriage coupling) Serial gateway for WLAN or
virtual COM interface via WLAN
virtual COM interface via WLAN
USB interface
1 x USB to connect the AutoConfiguration Adapter ACA21-USB
Radio technology
Antenna connector
Reverse SMA socket, 3 x MiMo antenna connectors
Range
Depends on type of antenna, frequency range and data rate. Use the BAT-Planner for planning your wireless network.
Frequency band
Supports 2.4 GHz and 5 GHz: 2400 -2483.5 MHz (ISM) and 5170 -5850 MHz
Modulation
22M0F7D (DSSS/OFDM) at 2.4 GHz20M0G7D (OFDM) at 5 GHz
Encryption
IEEE 802.11i / WPA2 with passphrase or 802.1x and hardware-accelerated AES, closed network, WEP64, WEP128, WEP152, user authentication, 802.1x /EAP,
LEPS, WPA1/TKIP. Please refer to the HiLCOS data sheet for further information.
LEPS, WPA1/TKIP. Please refer to the HiLCOS data sheet for further information.
Power requirements
Operating voltage
Voltage Range 1: PoE power feed (48 VDC)
Current consumption
12.95 W
Ambient conditions
Operating temperature
-40 ºC ... 70 ºC
Note
Temperature of the surrounding air.
Storage/transport temperature
-40 ºC ... 85 ºC
Relative humidity (non-condensing)
10 % ... 95 %
MTBF
58 years (MIL-HDBK-217F)
Protective paint on PCB
No
Mechanical construction
Dimensions (W x H x D)
150 mm x 136 mm x 115 mm
Mounting
DIN Rail
Protection class
IP30
Approvals
Safety of information technology equipment
EN 60950-1
Radio
FCC; EN 301 489-1, EN 301 489-17
Scope of delivery and accessories
Scope of delivery
Device, Installation user manual, CD/DVD with manual, Terminal cable, 2 x 50 Ohm terminators, 3 x per WLAN module 3-dBi dipole dual-band antennas, 2 × 2-
pin terminal block, 1 × 2-pin terminal block for the working voltage.
pin terminal block, 1 × 2-pin terminal block for the working voltage.
Accessories to order separately
External antennas; external surge protection; cables 2 m, 5 m, 15 m. Some countries does not allow all Antennas. For more information please have a look into
the Hirschmann Antenna Guide; wall mount plate
the Hirschmann Antenna Guide; wall mount plate