Cisco Unified IP Phone 7940G Specification Guide

Chapter 3 Setting Up the Cisco IP Phone

Verifying the Phone Startup Process

3-12

Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G

OL-4825-01

Verifying the Phone Startup Process

After the Cisco IP Phone has power connected to it, the phone begins its startup
process by cycling through the following steps.

These buttons flash on and off in sequence:

–

Headset

–

Mute

–

Speaker

The LCD screen displays the Universal Application Loader screen.

These messages and information appear as the phone starts up:

–

Configuring VLAN

–

Configuring IP

–

Requesting Configuration

–

TFTP CTLFile.tlv

–

TFTP SEPmacaddress.cnf.xml

–

Booting SEP Protocol

–

TFTP imagename.loads

–

Configuring VLAN

–

Configuring IP

–

Configuring CM List

–

Connecting

–

Registering

–

Requesting Template

The main LCD screen displays:

–

Current date and time

–

Primary directory number

–

Softkeys

If the phone successfully passes through these stages, it has started up properly.
If the phone does not start up properly, see the

“Resolving Startup Problems”

section on page 8-2