Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Specification Guide
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cable Connection Procedures for Cisco 2800
Series Routers
Series Routers
This document describes how to connect your Cisco 2800 series integrated services router to a power
source and to networks and external devices. It includes the following sections:
source and to networks and external devices. It includes the following sections:
•
•
•
Note
To see translations of the warnings that appear in this publication, refer to the
document that accompanied this device.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Statement 1001