Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Specification Guide
A-57
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Appendix A Power Supply Specifications
Power Supply Redundancy
Figure A-45 WS-CAC-4000W-INT=
Figure A-46 WS-CAC-4000W-US=
Power Supply Redundancy
Catalyst 6500 series switching modules have different power requirements. Depending upon the wattage
of the power supply, certain switch configurations might require more power than a single power supply
can provide. Although the power management feature allows you to supply power to all installed
modules with two power supplies, redundancy is not supported in this configuration. Redundant and
nonredundant power configurations are summarized in
of the power supply, certain switch configurations might require more power than a single power supply
can provide. Although the power management feature allows you to supply power to all installed
modules with two power supplies, redundancy is not supported in this configuration. Redundant and
nonredundant power configurations are summarized in
. The effects of changing the power
supply configurations are summarized in
Note
For proper load-sharing operation in a redundant power supply configuration, you must install two
modules in the chassis. If you fail to install two modules, you might receive spurious OUTPUT FAIL
indications on the power supply.
modules in the chassis. If you fail to install two modules, you might receive spurious OUTPUT FAIL
indications on the power supply.
Cordset rating: 32 A, 250 V
Length: 12 ft 0 in. (3.65 m)
Plug: IEC 60309
113365
Hardwired to
power
supply
Cordset rating: 30 A, 250 V
Length: 12 ft 0 in. (3.65 m)
Plug: NEMA L6-30
Hardwired to
power
supply
113366