Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Specification Guide
1-11
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6503-E Switch
Physical Characteristics
Dimensions (H x W x D)
•
7 x 17.37 x 21.75 in. (17.78 x 44.12 x 55.25 cm).
•
Chassis requires 4 RU
1
.
•
The Catalyst 6503-E switch chassis is designed to install in standard
19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and
ETS 300-119 standards.
19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and
ETS 300-119 standards.
Weight
•
Chassis only: 33 lb (15 kg).
•
Chassis fully configured with 1 supervisor engine, 2 modules,
2 AC-input PEMs, and 2 AC-input power supplies: 85.4 lb (38.7 kg).
2 AC-input PEMs, and 2 AC-input power supplies: 85.4 lb (38.7 kg).
Airflow
•
WS-C6503-E-FAN—282 CFM
Note
To maintain proper air circulation through the Catalyst switch
chassis, we recommend that you maintain a minimum 6-inch
(15 cm) separation between a wall and the chassis air intake or a wall
and the chassis air exhaust. You should also allow a minimum
separation of 12 inches (30.5 cm) between the hot air exhaust on one
chassis and the air intake on another chassis. Failure to maintain
adequate air space can cause the chassis to overheat and the system
to fail. On Catalyst chassis in which the airflow is from front to back,
the chassis may be placed side-by-side.
chassis, we recommend that you maintain a minimum 6-inch
(15 cm) separation between a wall and the chassis air intake or a wall
and the chassis air exhaust. You should also allow a minimum
separation of 12 inches (30.5 cm) between the hot air exhaust on one
chassis and the air intake on another chassis. Failure to maintain
adequate air space can cause the chassis to overheat and the system
to fail. On Catalyst chassis in which the airflow is from front to back,
the chassis may be placed side-by-side.
1.
RU = rack units
Table 1-4
Catalyst 6503-E Switch Specifications (continued)
Item
Specification