Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Specification Guide

Page of 336
1-46
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1      Product Overview
  Catalyst 6509-NEB-A Switch
Fan Tray
Supports two hot-swappable fan trays. These fan tray models are 
supported:
FAN-MOD-09 (High-speed fan tray—760 CFM). Supports 
Supervisor Engine 1, Supervisor Engine 2, Supervisor Engine 32, 
and Supervisor Engine 720.
Note
The fan tray contains four individual fans. The individual fans 
are not field replaceable. You must replace the fan tray.
Fan tray STATUS LED
Red—One or more individual fans have failed.
Green—Fan tray is operating normally.
Power Supply
Supports one or two power supplies. The following models are 
supported:
WS-CAC-2500W (2500 W AC-input power supply).
WS-CDC-2500W (2500 W DC-input power supply).
WS-CAC-3000W (3000 W AC-input power supply).
WS-CAC-4000W-US (4000 W AC-input power supply).
WS-CAC-4000W-INT (4000 W AC-input power supply).
PWR-4000-DC (4000 W DC-input power supply).
WS-CAC-6000W (6000 W AC-input power supply).
Installed power supplies can be of different ratings. Installed power 
supplies can also be both AC-input, both DC-input, or one AC-input and 
one DC-input. Power supplies can be configured in either redundant or 
non-redundant mode.
All Catalyst 6500 series AC-input power supplies require single-phase 
source AC. Source AC can be out of phase between multiple power 
supplies or multiple AC-power plugs on the same power supply because 
all AC power supply inputs are isolated.
Table 1-17
Catalyst 6509-NEB-A Switch Features (continued)
Feature
Description