Cisco 7500 SERIES ROUTE SWITCH PROCESSOR 16 Specification Guide
Cisco Systems, Inc.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 2 of 4
Product Specifications: Environmental Conditions
• Operating temperature: 32 to 104 F (0 to 40 C)
• Storage temperature: –40 to 167 F (–40 to 75 C)
• Relative humidity: 10% to 90%, noncondensing
• Operating altitude: -60 to 4000 m
Product Specifications: Memory and Options
Table 2 lists memory options for the Cisco RSP16.
Product Specifications: MIBs and Management
• Simple Network Management Protocol (SNMP) agent V1
(RFCs 1155-1157)
• Management Information Base (MIB) II (RFC 1213)
Product Specifications: Physical Specifications
The Cisco RSP16 occupies one chassis slot and can be operated only
in a Cisco 7500 Series Router, including the Cisco 7505, 7507, and
7513 Series routers.
The shipping weight is 5 lb (2.25 kg).
Product Specifications: LED Status Indicators
Table 3 gives LED status indicators of the Cisco RSP16.
Product Regulatory Approvals and Compliance
Product Regulatory Approvals
• UL 1950
• CSA C22.2 No. 950
• EN 60950
• IEC 950
• AS/NZS 3260
• CE Marking
Table 2
Cisco RSP16 Memory Options
Type
Size
Quantity
Description
SDRAM
1
1. Synchronous dynamic random access memory
128 MB (default)
256 MB (option)
512 MB (option)
1 GB (option
post FCS)
post FCS)
1 x 128 MB
1 x 256 MB
2 x 256 MB
2 x 512 MB
Any combination
of 128-, 256-, or
512-MB DIMMs
of 128-, 256-, or
512-MB DIMMs
2
(based on SDRAM
required) for main
Cisco IOS
required) for main
Cisco IOS
®
Software image
functions
functions
2. Double in-line memory modules
SRAM
8 MB (fixed)
–
SRAM for packet
buffering functions
(MEMD)
buffering functions
(MEMD)
2 MB (fixed)
–
SRAM for tertiary
(Layer 3) CPU
cache memory
functions
(Layer 3) CPU
cache memory
functions
NVRAM
3
3. Nonvolatile random access memory
2 MB (fixed)
–
Nonvolatile SRAM
for the system
configuration file
for the system
configuration file
Flash
memory
memory
16-MB SIMM
4
4. Single in-line memory module
–
Contains the Cisco
IOS Software
images on Cisco
RSP16
IOS Software
images on Cisco
RSP16
48 MB (default)
128 MB (option)
Up to 2
Flash disks
Flash disks
Contains the Cisco
IOS Software
images on up to 2
Flash disks
IOS Software
images on up to 2
Flash disks
Flash
boot ROM
boot ROM
512 kB (fixed)
–
Flash EPROM
5
for
the ROM monitor
program image
program image
5. Erasable programmable read-only memory
Table 3
LED Status Indicators
LED Label
Color
State
Indication
Normal
Green
On
Cisco RSP16 is on and
receiving +5V
receiving +5V
CPU halt
Green
Yellow
Off
On
Cisco RSP16 is operating
normally
normally
Processor hardware
failure has been detected
failure has been detected
Active
Green
On
Cisco RSP16 is active
Standby
Green
On
Cisco RSP16 is standby
(HSA
(HSA
1
configuration
required)
1. Global Resilience IP
Slot 0 PC Card
Green
On
PC Card in this slot is
being accessed
being accessed
Slot 1 PC Card
Green
On
PC Card in this slot is
being accessed
being accessed