Cisco CATALYST 4006 CHASSIS 6 SLOT WITHOUT POWER SUPPLIES Specification Guide

Cisco Systems, Inc.

Page 7 of 15

• 48-port 10/100-Mbps Ethernet (RJ-45)—WS-X4148-RJ—This module provides 48 ports of dedicated 10/100

Ethernet switching for Ethernet or Fast Ethernet client or server switching. All ports can use Cisco Fast

EtherChannel

technology for higher-speed uplinks or server connections.

• 48-port 10/100-Mbps Ethernet with inline power (RJ-45)—WS-X4148-RJ45V—The inline power 10/

100BASE-T Ethernet switching module supports up to 48 ports per module (RJ-45 interfaces). Along with phone

discovery, these modules support autosensing and autonegotiation to determine the speed and duplex mode of

the attached device. The Cisco Catalyst 4003 uses the Cisco Catalyst Inline Power Patch Panel to provide inline

power. The Cisco Catalyst 4006, with support for up to 240 multiservice ports, directly provides inline power.

To support the new demand for phone power and WLANs, Cisco has developed a new auxiliary DC power shelf

that supplies the Cisco Catalyst 4006 with the 48 volts needed for inline power.

• 48-port 100-Mbps Ethernet (RJ-21 telco)—WS-X4148-RJ21—This module provides 48 ports of dedicated 100

Ethernet switching for Fast Ethernet client or server switching. All ports can use Cisco Fast EtherChannel

technology for higher-speed uplinks or server connections.

• Layer 3 Services Engine—32-port 10/100-Mbps Ethernet plus 2-port Gigabit Ethernet

uplinks—WS-X4232-L3—This module gives access to Layer 3 services to all Cisco Catalyst 4000 Series

supervisor engines, delivering Layer 3 routing to the entire chassis. In addition, this module provides 32 ports of

dedicated 10/100 Ethernet switching for Ethernet or Fast Ethernet client or server switching, along with 2

dedicated Gigabit Ethernet connections for Cisco Gigabit EtherChannel connection to a high-speed core or

Gigabit Ethernet server connections. All 10/100 ports can use Cisco Fast EtherChannel technology for

higher-speed uplinks or server connections.

• Access Gateway Module—WS-X4604-GWY—The Cisco Catalyst 4500 Access Gateway Module (AGM)

integrates Cisco IOS Software routing and Cisco CallManager voice services into Cisco Catalyst 4000 Series

switches. Combining the LAN and WAN infrastructure enables businesses to reduce network complexity,

improve network deployment times, and prepare for voice, video, and data convergence.

• 48-port 100-Mbps Ethernet 100BASE-LX10 (MT-RJ)—WS-X4148-FX-MT—The 48-port 100BASE-LX10 Fast

Ethernet line card for single-mode fiber provides high-density connectivity for both residential and small business

customers over distances up to 10 km. Fast Ethernet over single-mode fiber offers an attractive choice of cost and

future performance; the same access fiber infrastructure can be Gigabit-enabled by upgrading the switching

equipment.

• 24-port 100-Mbps Ethernet 100BASE-FX (MT-RJ)—WS-X4124-FX-MT—This module provides 24 ports of

dedicated 100 Fast Ethernet client or server switching. All ports can use Cisco Fast EtherChannel technology for

higher-speed uplinks or server connections.

• 48-port 100-Mbps Ethernet 100BASE-FX (MT-RJ)—WS-X4148-FX-MT—The 48-port line card (single-slot) is

based on the same architecture as the 24-port 100BASE-FX line card with MT-RJ connectors. Both line cards

offer the security and resiliency features of fiber-optic cable plants, optimizing them for networks with concerns

for distance limitations, intrusion, or radio frequency interference. Government agencies or enterprise customers

that process confidential information or offer e-commerce are optimal candidates for these line cards.