Cisco 2x Voice/Fax Slot Network Module Specification Guide
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 3 of 5
The Cisco IP Communications Voice/Fax Network Modules (and associated VICs) are supported on Cisco 2600XM Series products, and Cisco
2691, 3640/A, and 3660 multiservice access routers, and Cisco 3725 and 3745 multiservice access routers starting with Cisco IOS® Software
releases 12.2(15)ZJ, 12.3(4)T, and 12.4M. These network modules and VICs are supported on Cisco 2800 and 3800 Integrated Services Routers
starting with Cisco IOS Software releases 12.3(8)T4 and 12.3(11)T, respectively. (Note: Cisco 2801 Integrated Services Router supports only the
VICs since it does not contain a network module slot.) These VICs are also supported on Cisco 1751 and 1760 modular access routers platforms in
Cisco IOS Software Release 12.3(4)T and mainline 12.3(5) or later releases.
Additional information about the IP Communications Voice/Fax Network Modules can be found at:
http://www.cisco.com/en/US/products/hw/modules/ps5365/products_data_sheet0900aecd801c595e.html
Table 3. Product Comparisons
Cisco EOL Product
Cisco Replacement Product
Comments
NM-1V
NM-HD-1V
Twice the channel density of the NM-1V Supports up to 4 FXS, 4 FXO, 2 DID,
2 E&M, or 2 BRI ports
NM-2V
NM-HD-2V
Twice the channel density of the NM-2V Supports up to 8 FXS, 8 FXO, 4 DID,
4 E&M, or 4 BRI ports (or a mix)
VIC-2FXS
VIC2-2FXS or VIC-4FXS/DID
Can choose a 2-port or a 4-port VIC. The DID feature of VIC-4FXS/DID
currently is supported only on the Cisco 1751 and 1760 modular access routers
VIC-2FXO
VIC2-2FXO or VIC2-4FXO
Can choose a 2-port or a 4-port VIC. The new VIC2-xFXO are universal cards
for all countries
VIC-2FXO-EU
VIC2-2FXO or VIC2-4FXO
Can choose a 2-port or a 4-port VIC
VIC-2FXO-M1
VIC2-2FXO or VIC2-4FXO
Can choose a 2-port or a 4-port VIC
VIC-2FXO-M2
VIC2-2FXO or VIC2-4FXO
Can choose a 2-port or a 4-port VIC
VIC-2FXO-M3
VIC2-2FXO or VIC2-4FXO
Can choose a 2-port or a 4-port VIC
VIC-2CAMA
VIC2-2FXO or VIC2-4FXO
FXO cards include the CAMA option
VIC-2E/M
VIC2-2E/M
Same density as the VIC-2E/M
VIC-2BRI-S/T-TE
VIC2-2BRI-NT/TE
Supports terminal and network side
VIC-2BRI-NT/TE
VIC2-2BRI-NT/TE
Supports terminal and network side
The NM-HD-xx network modules also support the VIC-2DID.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment.
For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/
. The Cisco TMP application requires all users to have a Cisco.com
user ID.
Customers may be able to continue to purchase Cisco low density voice/fax network modules (NM-1V and NM-2V) and associated VICs through
Cisco’s Authorized Refurbished Equipment program. Refurbished units of these network modules and VICs are available in limited supply for sale