Cisco 7000 SERIES PA 8 PORT T1 MC ADAPTER WITH CSU DSU Specification Guide
4-41
Multichannel DS1/PRI Port Adapter Installation and Configuration
OL-3525-03
Chapter 4 Configuring the Multichannel DS1/PRI Interfaces
Checking the Configuration
Note
The “Status” field is irrelevant when the BERT is done. If the “Sync Detected” counter is 0, the Bit
Errors fields have no meaning.
Errors fields have no meaning.
Example 3: Display BERT Results Output When the Test Is Stopped Prematurely
Catalyst RSM/VIP2
Router# show controllers t1 0/0
T1 0/0 is up.
DSX1 BERT pattern : zeros
DSX1 BERT sync : done
DSX1 BERT sync count : 1
DSX1 BERT interval : 2
DSX1 BERT time remain : 2
DSX1 BERT total errs : 0
DSX1 BERT total k bits: 6166
DSX1 BERT errors (last): 0
DSX1 BERT k bits (last): 6166
Applique type is Channelized T1
No alarms detected.
Cablelength is long gain36 0db
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Data in current interval (267 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Router#
Cisco 7100 Series
Router# show controllers t1 4/0
T1 4/0 is up. (Diagnostic Loopback)
DSX1 BERT pattern : zeros
DSX1 BERT sync : done
DSX1 BERT sync count : 1
DSX1 BERT interval : 2
DSX1 BERT time remain : 2
DSX1 BERT total errs : 0
DSX1 BERT total k bits: 6166
DSX1 BERT errors (last): 0
DSX1 BERT k bits (last): 6166
Applique type is Channelized T1
Receiver has no alarms.
Cablelength is long gain36 0db
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Data in current interval (58 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Router#
Cisco 7200 or Cisco uBR7200 Series Routers
Router# show controllers t1 2/0
T1 2/0 is up. (Diagnostic Loopback)