Cisco 7000 SERIES PA 8 PORT T1 MC ADAPTER WITH CSU DSU Specification Guide
3-10
Multichannel DS1/PRI Port Adapte Installation and Configuration
OL-3525-03
Chapter 3 Removing and Installing Port Adapters
Port Adapter Removal and Installation
Cisco uBR7200 Series—Installing a Port Adapter
Step 1
To insert the port adapter, carefully
align the port adapter carrier
between the upper and the lower
edges of the port adapter slot.
align the port adapter carrier
between the upper and the lower
edges of the port adapter slot.
Step 2
Carefully slide the new port adapter
halfway into the port adapter slot.
halfway into the port adapter slot.
Step 3
With the port adapter halfway into
the slot, connect all required cables
to the port adapter. After connecting
all required cables, carefully slide
the port adapter all the way into the
slot until the port adapter is seated in
the router midplane.
the slot, connect all required cables
to the port adapter. After connecting
all required cables, carefully slide
the port adapter all the way into the
slot until the port adapter is seated in
the router midplane.
Step 4
After the port adapter is properly
seated, lock the port adapter lever or
retention clip, depending on your
system. (See illustration on
preceding page.)
seated, lock the port adapter lever or
retention clip, depending on your
system. (See illustration on
preceding page.)
26524
Inside
slot guide
Metal carrier
PC board