Cisco CATALYST 1924 ENTERPRISE SWITCH Specification Guide
Overview 1-7
CLI
Table 1-3
Default Settings and Their Configuration Utilities
CLI
The CLI is an Enterprise Edition feature. All configuration and management options are
supported through the CLI. This book lists the available CLI commands for each feature in
the section detailing that feature. For detailed information on how to use the CLI, refer to
the Catalyst 2820 Series and Catalyst 1900 Series Command Reference.
supported through the CLI. This book lists the available CLI commands for each feature in
the section detailing that feature. For detailed information on how to use the CLI, refer to
the Catalyst 2820 Series and Catalyst 1900 Series Command Reference.
Menu System
The menu console contains options for base configuration (as described in the Catalyst
1900 and Catalyst 2820 installation guides) and for configuring VLANs. However, not all
features can be accessed using its menus.
1900 and Catalyst 2820 installation guides) and for configuring VLANs. However, not all
features can be accessed using its menus.
The management console menu-driven system uses the following conventions:
•
Select a menu by entering the letter in square brackets that precedes the selection. The
selected menu appears.
selected menu appears.
•
Press Return after entering any parameters. When pressed at the beginning of a
parameter entry, Return cancels the attempt, and the menu reappears.
parameter entry, Return cancels the attempt, and the menu reappears.
•
Use the Backspace key to erase the character previously entered. Press Backspace at the
beginning of a parameter to clear the entry.
beginning of a parameter to clear the entry.
•
Enter an X to return to the previous menu. Enter an X on the Main Menu to exit the
management console and return to the command prompt.
management console and return to the command prompt.
Feature
Default Setting
Configuration
Utility
Utility
VLANs
VLAN 1 is the default Ethernet VLAN. All ports
are nontrunk, static ports and belong to VLAN 1.
are nontrunk, static ports and belong to VLAN 1.
Virtual LAN menu
or CLI
or CLI
Fast EtherChannel
Off.
CLI
TACACS+
Disabled.
CLI
Configuration File
Upload/Download
Upload/Download
Disabled.
CLI